X axis travel;Y axis travel;Z axis travel;Spindle center to column;Spindle nose to table surface;Table work area;Dimension of T-slot;Max. table load;Spindle taper;Spindle motor - cont / 30 / 10min;Spindle speed;Rapid feed rate - X / Y / Z;Axis acceleration - X / Y / Z;Axis feed motor - X / Y / Z;Cutting feedrate by table;X ballscrew (dia. x pitch);Y ballscrew;Z ballscrew;Linear guide width (X / Y / Z);Max. tool length;Max. tool weight;Magazine capacity;Max. tool diameter (without adjacent tools);Tool exchange time;Pull stud angle;Tool selection method;Power requirement;Min/Max. air pressure;Coolant tank capacity;Std. NC controller (Fanuc);Floor space requirement (with conveyor);Max. machine height;Machine weight
1100 mm;600 mm;560 mm;720 mm;150 ~ 710 mm;1350 x 600 mm;6 x 18 x 100 mm;1200 kg;BT-40;7.5 / 11 / 15 Opt. 15 / 18.5 / - kW;12000 (Opt. 15000) rpm;42 / 42 / 42;0.5G / 0.5G / 0.75G m/sec2;4.5 / 4.5 / 5.5 kW;10 (Opt. 15) m/min;45 x P16 (Opt. P8) mm;45 x P16 (Opt. P8) mm;45 x P16 (Opt. P8) mm;45 / 45 / 45 mm;300 mm;7 kg;24 (Opt. 32);80 (125) mm;2.4 (T-T), 5.4 (C-C) sec.;15 (JIS 40P) deg.;Random;40 (excl. CTS) kVA;5.5 ~ 6.5 kg/cm2;550 L;0i-MD (10.4");4827 x 3570 mm;2785 mm;7400 kg
No items found.
Fortune International
Fortune International CNC Vertical Machining Center Vcenter-A110
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Tehnical Specifications
PRODUCT DETAILS
(OPTIONS)
FEatures
- X-travel 760/1060/1360 mm for Vc-P76/P106/P136
- High rapid feeds 48/48/32 m/min (P76/P106)
- 12000rpm spindle output 18.5 KW(S3)
- BBT-40 / 30 tools
- Roller guideways
- Bottom guarding flush (P106 only)
- Screw chip removers
- Electrical counterbalance
- APC mechanism seated on ground for high rigidity
- Pallet dimension 720mm x 400mm
- Pallet exchange time: 15 seconds (Incl. air sealing detection time)
- Control panel at right side for easy operation
- Linear scales and 4th axis can be installed
Catalogues
%201.png)
