Diameter;Bar Length;Loading Capacity;Headstock Type;Max. Remnant Length;Partial Changeover;Total Changeover
ø .118" to 1.02" / ø 3 mm - 26 mm;3.25’ to 12’3” / 990 min. to 3749 max.;10.6" / 270 mm;Sliding;400 mm;2 minutes (within the guiding channel range);8 minutes (for all guiding elements)
No items found.
LNS North America
LNS North America GT 326-E Automatic Magazine Bar Feeder
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
- Innovative Front StabilizerThe two-position automatic hydrostatic front stabilizer with v-shaped guiding elements dampens residual vibration between the front of the bar feeder and the back of the spindle. Quickly and accurately change to the bar diameter by simply making a manual adjustment.Air blast is included to eliminate residual oil from the bar feeder to the machine.
- Easy to Use HMIThe operator-friendly HMI ensures the interaction between the bar feeder and the lathe, and therefore the production process can be run safely and efficiently. The HMI is ultra light featuring easy set up and operation.It displays alarm description, alarm history of operation errors and position tracking (inch/metric programming).
- Quick Changeover SimplicityChangeover of bar diameter on magazine tray is performed by a simple manual adjustment via the changeover gauge, no tool required. A four position scale allows you to visually see where your new adjustment is aligned for accuracy and quick selection.